Show simple item record

dc.contributor.authorSingh, Arpan 12:58:50 (GMT) 12:58:50 (GMT)
dc.description.abstractIn automotive hot stamping of Al-Si coated 22MnB5 steel, the heat transfer coefficient (HTC) between the blank and die is crucial for predicting the mechanical properties of the as-formed part. While average HTCs associated to a range of interfacial pressures are used in hot stamping operations design, in reality the HTC varies during quenching and depends on many other process parameters in addition to interfacial pressure. An improved understanding of the transient behavior of the HTC is the overarching focus here. This work involves an experimental investigation to study the effects of pressure, coating weight, and surface roughness on the HTC evolution. Flat dies were mounted on a hydraulic press to obtain the temperature history within the blank and die. The data was analyzed using an inverse heat conduction algorithm to infer the time-resolved HTC. The HTC increases in two stages with the first being attributed to press tonnage ramp-up that gradually increases interfacial pressure. The second stage is attributed to an increase in the thermal conductivity and volume of the blank as its microstructure transforms from austenite to martensite. The experimental work also highlights how seemingly subtle aspects of this experiment, like the positioning and time-constant of the thermocouples, may impact the inferred HTC. Furthermore, nonuniformity of the interfacial pressure appears to lower the target pressure at which the HTC saturates, and diminish the time-averaged HTC with increasing target pressures. This work also presents a physics-based model that explains and predicts the HTC evolution. The model simulates imperfect contact using the measured blank surface topography, an explicit finite difference scheme to solve the transient heat conduction, and a nonlinear mechanical submodel to solve the microscale displacement of the die due to uniaxial compression of surface asperities. The predicted HTC history is in fair agreement with the experimental result. The model suggests that the evolving thermal conductivity of 22MnB5 does not affect the HTC due to the shielding behavior of the resolidified Al-Fe-Si coating layer at the interface. The model also explains how all hot stamping process parameters influence the HTC and lays the groundwork for a unified model that captures the physics of the entire hot stamping process.en
dc.publisherUniversity of Waterlooen
dc.subjecthot stampingen
dc.subject22MnB5 steelen
dc.subjectinterfacial heat transfer coefficienten
dc.subjectaluminum-silicon coatingen
dc.subjectthermo-mechanical modellingen
dc.subjectinverse heat conduction analysisen
dc.subjectthermocouple time constanten
dc.titleExperimental Characterization and Numerical Modelling of the Interfacial Heat Transfer Coefficient in Hot Stamping of Al-Si Coated 22MnB5 Steelen
dc.typeMaster Thesisen
dc.pendingfalse and Mechatronics Engineeringen Engineeringen of Waterlooen
uws-etd.degreeMaster of Applied Scienceen
uws.contributor.advisorDaun, Kyle
uws.contributor.advisorButcher, Cliff
uws.contributor.affiliation1Faculty of Engineeringen

Files in this item


This item appears in the following Collection(s)

Show simple item record


University of Waterloo Library
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4883

All items in UWSpace are protected by copyright, with all rights reserved.

DSpace software

Service outages