Browsing Mechanical and Mechatronics Engineering by Title
Now showing items 250-269 of 1484
-
Damage Evolution in Complex-Phase and Dual-Phase Steels during Edge Stretching
(Multidisciplinary Digital Publishing Institute, 2017-03-27)The role of microstructural damage in controlling the edge stretchability of Complex-Phase (CP) and Dual-Phase (DP) steels was evaluated using hole tension experiments. The experiments considered a tensile specimen with a ... -
Data related to architectural bone parameters and the relationship to Ti lattice design for powder bed fusion additive manufacturing
(Elsevier, 2021-12)The data included in this article provides additional supporting information on our publication (McGregor et al. [1]) on the review of the natural lattice architecture in human bone and its implication towards titanium ... -
Data related to the effect of specimen geometry and orientation on tensile properties of Ti-6Al-4V manufactured by electron beam powder bed fusion
(Elsevier, 2021-12)Additive manufacturing quality assessment often relies on tensile testing as the preferred methodology to qualify builds and materials. The data included in this article provides additional supporting information on our ... -
A Data-Driven Approach for Generating Vortex Shedding Regime Maps for an Oscillating Cylinder
(University of Waterloo, 2022-01-20)Recent developments in wind energy extraction methods from vortex-induced vibration (VIV) have fueled the research into vortex shedding behaviour. The vortex shedding map is vital for the consistent use of normalized ... -
A Decentralized Approach to Dynamic Collaborative Driving Coordination
(University of Waterloo, 2008-08-29)This thesis presents a novel approach to several problems in intelligent transportation systems using collaborative driving coordination. With inter-vehicle communication and intelligent vehicle cooperation, important ... -
Deconvolution of overlapping peaks from differential scanning calorimetry analysis for multi-phase NiTi alloys
(Elsevier, 2018-07-10)An adaptive function capable of fitting the curve of Differential Scanning Calorimetry (DSC) data for any NiTi phase transformation peak has been developed. A novel methodology was applied in conjunction with this new ... -
Decreasing Graphene Contact Resistance by Increasing Edge Contact Length
(University of Waterloo, 2016-05-12)Graphene is a two dimensional material which has combination of unique mechanical, electrical and optical properties. Due to the unique properties of graphene, it has potential for several applications such as radio frequency ... -
Deep Dynamic Stall and Active Aerodynamic Modification on a S833 Airfoil using Pitching Trailing Edge Flap
(SAGE Journals, 2020-08)Due to the dynamic nature of the wind resource, wind turbine blades are subjected to significant variation in flow parameters such as angle of attack. In some cases, the occurrence of dynamic stall on wind turbine blades ... -
Deep Learning-Enabled Cerebrovascular Reactivity Processing Software
(University of Waterloo, 2022-12-23)Magnetic Resonance Imaging (MRI) is a non-invasive medical imaging technique that is used to generate high-resolution images of the brain. Blood oxygenation level dependent (BOLD) imaging is a functional MRI technique that ... -
Demonstration Of New ESP-R Capability For Quantifying The Energy Savings Potential Of Window Shading Devices
(2009-06)Buildings with highly glazed facades and well insulated, air-tight envelopes result in interior spaces that are highly sensitive to solar gain. Solar gain through glazing is the largest and most variable gain in buildings ... -
Dendritic coarsening model for rapid solidification of Ni-superalloy via electrospark deposition
(Elsevier, 2018-08-01)Control of splat thickness in an electrospark deposition (ESD) process can be used to improve the mechanical properties of deposited Inconel 718. The lower cooling rates of thicker deposition splats obtained through higher ... -
A Dependable Actuator and Sensor Health Monitoring System
(University of Waterloo, 2023-06-27)Impressive progress in vehicle control technologies has equipped modern vehicles with advanced driver assistance and stability control systems to help the driver handle unfavorable driving conditions. These control systems ... -
Depth-sensing thermal stability of accumulative fold-forged nanostructured materials
(Elsevier, 2021-04)Accumulative fold-forging (AFF) as a newly developed severe plastic deformation (SPD) process based on the repetitive fold-forging steps is implemented for the production of the layered UFG (~200 nm) AA8006 alloy and ... -
Design a Reliable Model Predictive Control for Path Following with Application to the Autonomous Vehicle and Considering Different Vehicle Models
(University of Waterloo, 2021-03-12)Despite many advances that aim to bring autonomous cars to market, several challenges remain to overcome before such technology is widely adopted. Among these is the need for a reliable cornering control that can work ... -
Design and Analysis of a MEMS Fabry-Perot Pressure Sensor
(University of Waterloo, 2007-09-28)Accurate dynamic pressure measurements in the jet engine compressors are the key point in the detection of instabilities that are often precursors to surge or rotating stall. Localized pressure measurements are also very ... -
Design and Characterization of Resist and Mold Materials for Electron-Beam and Nanoimprint Lithography
(University of Waterloo, 2011-08-31)Electron beam lithography (EBL) and Nanoimprint Lithography (NIL) are the promising tools for today’s technology in terms of resolution capability, fidelity and cost of operation. Achieving highest possible resolution is ... -
Design and Characterization of Self-Biasing NiTi Spring Actuator
(University of Waterloo, 2016-10-14)Spring actuators are essential components in vehicles as they are used for climate control, braking ventilation, engine control and fuel management. However, commercially available spring actuators are heavy and expensive ... -
Design and Control of a Unique Hydrogen Fuel Cell Plug-In Hybrid Electric Vehicle
(University of Waterloo, 2014-01-20)The University of Waterloo Alternative Fuels Team (UWAFT) is a student team that designs and builds vehicles with advanced powertrains. UWAFT uses alternatives to fossil fuels because of their lower environmental impacts ... -
Design and Development of a Dynamic Knee Injury Simulator
(University of Waterloo, 2009-09-02)The knee is one of the most complex joints in the body, relying entirely on ligaments and muscles for stabilization. With the rise in people participating in sports, including a significant increase in female athletes, ... -
Design and Development of Microneedle Pads for Automated External Defibrillators (AEDs)
(University of Waterloo, 2024-04-19)With the prominent and life-threatening issue of sudden cardiac arrest (SCA), the demands for increased accessibility and effectiveness of AEDs continue to rise. Timely access to automated external defibrillators (AEDs) ...