Show simple item record

dc.contributor.authorTaghavipour, Amir 20:09:26 (GMT) 20:09:26 (GMT)
dc.description.abstractAir pollution and rising fuel costs are becoming increasingly important concerns for the transportation industry. Hybrid electric vehicles (HEVs) are seen as a solution to these problems as they off er lower emissions and better fuel economy compared to conventional internal combustion engine vehicles. A typical HEV powertrain consists of an internal combustion engine, an electric motor/generator, and a power storage device (usually a battery). Another type of HEV is the plug-in hybrid electric vehicle (PHEV), which is conceptually similar to the fully electric vehicle. The battery in a PHEV is designed to be fully charged using a conventional home electric plug or a charging station. As such, the vehicle can travel further in full-electric mode, which greatly improves the fuel economy of PHEVs compared to HEVs. In this study, an optimal energy management system (EMS) for a PHEV is designed to minimize fuel consumption by considering engine emissions reduction. This is achieved by using the model predictive control (MPC) approach. MPC is an optimal model-based approach that can accommodate the many constraints involved in the design of EMSs, and is suitable for real-time implementations. The design and real-time implementation of such a control approach involves control-oriented modeling, controller design (including high-level and low-level controllers), and control scheme performance evaluation. All of these issues will be addressed in this thesis. A control-relevant parameter estimation (CRPE) approach is used to make the control-oriented model more accurate. This improves the EMS performance, while maintaining its real-time implementation capability. To reduce the computational complexity, the standard MPC controller is replaced by its explicit form. The explicit model predictive controller (eMPC) achieves the same performance as the implicit MPC, but requires less computational effort, which leads to a fast and reliable implementation. The performance of the control scheme is evaluated through different stages of model-in-the-loop (MIL) simulations with an equation-based and validated high-fidelity simulation model of a PHEV powertrain. Finally, the CRPE-eMPC EMS is validated through a hardware-in-the-loop (HIL) test. HIL simulation shows that the proposed EMS can be implemented to a commercial control hardware in real time and results in promising fuel economy figures and emissions performance, while maintaining vehicle drivability.en
dc.publisherUniversity of Waterlooen
dc.subjectPlug-in hybrid electric vehiclesen
dc.subjectEnergy management systemen
dc.subjectFuel economyen
dc.subjectExplicit model predictive controlen
dc.subjectControl-relevant parameter estimationen
dc.subjectHardware-in-the-loop simulationen
dc.titleReal-time Optimal Energy Management System for Plug-in Hybrid Electric Vehiclesen
dc.typeDoctoral Thesisen
dc.subject.programSystem Design Engineeringen Design Engineeringen
uws-etd.degreeDoctor of Philosophyen

Files in this item


This item appears in the following Collection(s)

Show simple item record


University of Waterloo Library
200 University Avenue West
Waterloo, Ontario, Canada N2L 3G1
519 888 4883

All items in UWSpace are protected by copyright, with all rights reserved.

DSpace software

Service outages