Browsing Mechanical and Mechatronics Engineering by Title
Now showing items 860-879 of 1494
-
A Large-Stroke Electrostatic Micro-Actuator
(University of Waterloo, 2011-01-17)Parallel-plate electrostatic actuators driven by a voltage difference between two electrodes suffer from an operation range limited to 30% of the gap that has significantly restrained their applications in Microelectromechanical ... -
Laser Absorption Chemical Species Tomography
(University of Waterloo, 2013-08-07)This thesis outlines two advancements in the field of limited data absorption tomography. First, a novel reconstruction algorithm integrating the use of level set methods is presented that incorporates the additional a ... -
Laser Brazing of Magnesium to Steel Sheet
(University of Waterloo, 2013-10-24)The ability to effectively join magnesium alloys to steel will facilitate increased application and use of Mg alloys in the automotive and aerospace industries where joining Mg alloys to steel in order to achieve light ... -
Laser Direct Deposition of Metal Matrix Diamond Composite
(University of Waterloo, 2016-01-04)Diamond, the hardest natural material known to humankind, is an ideal candidate for cutting and wear application, however implementing diamond in tooling is not without its challenges. Consequentially, these challenges ... -
Laser Doppler Anemometry and Acoustic Measurements of an S822 Airfoil at Low Reynolds Numbers
(University of Waterloo, 2011-04-26)Experimental aeroacoustic research was conducted on a wind turbine specific airfoil at low Reynolds numbers. The goal of this thesis was to study trailing edge noise generation from the airfoil and investigate correlations ... -
Laser fabrication and performance of NiCr strain gauges
(University of Waterloo, 2022-10-26)Increasing demand for smart devices has spurred the development of advanced sensors with smaller and more adaptable form factors. The integration of thin film technology into sensors such as strain gauges has the potential ... -
Laser Microwelding of Fine Wires using Femtosecond Pulses
(University of Waterloo, 2014-09-19)An alternative wire joining method is explored that utilizes femtosecond laser pulses directed towards the contact point of two pieces of 25-μm diameter Au bonding wires typically used in microelectronics wire bonding. The ... -
Laser Powder Bed Fusion of AlSi10Mg for Fabrication of Fluid Power Components
(University of Waterloo, 2020-01-06)Laser powder bed fusion (LPBF) is an additive manufacturing (AM) process that produces 3D objects in a layer-by-layer fashion by using a laser to selectively melt powdered material. Some of the advantages of LPBF include ... -
Laser Processing and Modelling of Multiple Memory Shape Memory Alloys
(University of Waterloo, 2018-04-18)Laser processing of NiTi shape memory alloys (SMA) has been identified as having great potential in surface treatment, welding, and novel performance requirement applications. However, no models have been developed to ... -
Laser Processing, Thermomechanical Processing, and Thermomechanical Fatigue of NiTi Shape Memory Alloys
(University of Waterloo, 2016-04-28)NiTi shape memory alloys (SMAs) have revolutionized engineering design across all industries, with major contributions in the medical, aerospace, and automotive industries. These fascinating materials possess the shape ... -
Laser Welding of Complex Phase and Dual Phase Advanced High Strength Steels - The Effects that Welding has on Microstructure and Formability
(University of Waterloo, 2020-05-19)To assist in the successful applications of tailor-welded assemblies made from advanced high strength steel (AHSS), there needs to be a thorough understanding of how laser welding process parameters influences the weld ... -
Laser Welding of Medium-Manganese Steel
(University of Waterloo, 2016-08-31)Medium-Manganese (MMn) third generation advanced high strength steel (AHSS) was joined using laser welding. The effects of rapid heating and cooling thermal cycles imposed by laser welding on MMn steel was investigated. ... -
Laser Welding of Porcine Skeletal Muscle Tissue Using Near Infra-red Irradiation with Gold Nanorod Biosolders
(University of Waterloo, 2024-04-29)Laser tissue welding is an efficient and quick technique used to join tissues for wound repair in the event of injury or surgery. Compared to traditional joining methods such as suturing, optimized laser tissue welding ... -
Laser-based aerosolized nanoparticle diagnostics: Enhancing the spectroscopic model
(University of Waterloo, 2020-05-15)The distinct properties of nanoparticles compared to their bulk counterparts makes them a suitable candidate for the development of many emerging technologies, and this presents a demand for scalable production routes. ... -
The Later Stages of Transition over a NACA0018 Airfoil at a Low Reynolds Number
(University of Waterloo, 2014-02-18)The later stages of separated shear layer transition within separation bubbles developing over a NACA0018 airfoil operating at a chord Reynolds number of 105 and at angles of attack of 0, 5, 8, and 10 degrees were investigated ... -
Lattice Boltzmann Method for Simulating Turbulent Flows
(University of Waterloo, 2013-08-06)The lattice Boltzmann method (LBM) is a relatively new method for fluid flow simulations, and is recently gaining popularity due to its simple algorithm and parallel scalability. Although the method has been successfully ... -
Least-Squares Based Adaptive Source Localization with Biomedical Applications
(University of Waterloo, 2013-04-22)In this thesis, we study certain aspects of signal source/target localization by sensory agents and their biomedical applications. We first focus on a generic distance measurement based problem: Estimation of the location ... -
LES and FW-H Prediction of Aeroacoustic Noise for a SD 7037 Airfoil for Wind Turbine Applications
(American Institute of Aeronautics and Astronautics, Inc., 2019-05-18)The aeroacoustic noise generated by wind turbines poses issues with the implementation of this renewable energy technology. The use of a fully analytical model for predicting airfoil noise could serve as a crucial tool in ... -
Leveraging Atmospheric-Pressure Spatial Atomic Layer Deposition and Machine Learning for Nanomaterial and Device Design
(University of Waterloo, 2023-07-27)The deposition and design of nanometre-scale oxide films is an integral component of the ongoing nanomaterial revolution, from cell phones, to batteries, to photovoltaics. Atmospheric-pressure spatial atomic layer deposition ... -
LIDAR Odometry with Joint Geometric and Appearance Landmarks
(University of Waterloo, 2019-04-08)Odometry is the problem of estimating the motion of a moving platform relative to its environment without measurements to a fixed reference point. This is a critical problem for mobile robotics applications where ...